Fusion Core DC Flo is dual-curing, radiopaque, flowable composite for core build-up. It contains 75% w/w inorganic fillers in a methacrylate matrix.
Base Paste: Bisphenol A Glycidyle Methacrylate, Ethoxylated Bisphenol A Dimethacrylate, Triethylene Glycol Dimethacrylate, Silanated Barium Glass Powder, Amorphous Fumed Silica, Curing Agents and Stabilizers
Catalyst Paste: Bisphenol A Glycidyle Methacrylate, Ethoxyated Bisphenol A Dimethacrylate, Ethoxlated, Triethylene Glycol Dimethacrylate, Silanated Barium Glass Powder, Amorphous Fumed Silica, Curing Agents and Stabilizers
- Core build-up, for vital as well as non vital teeth
- Luting of fibre-reinforced resin posts
- Light curing for time saving application
- Additional chemical curing for complete polymerization
- Low heat development even in bulk application
- Flowable, non slumping formula for convenient placement
- Low shrinkage properties
Instructions for use
Sufficiently dry the working area. Prepare the cavity suitably for the restorative treatment and should be minimally invasive in order to protect healthy dental hard tissue. Clean and dry the cavity. Protect the pulp suitably with a light cure cavity liner preferably with Cal LC or Fusion I-Seal. Apply Fusion Bond DC to the prepared cavity. Remove the cartridge cap and attach a mixing tip. Attach intra oral tip if required. Place matrix around the prepared tooth and apply Fusion Core DC Flo directly from the cartridge. Allow 3-4 minutes for the material to set properly. Light cure for 40 sec. Restoration can be finished immediately after light curing.
Intro Pack 1X9g Automix Syringe, 10XIntra-Oral-Tips, 10XEndo-Tips,