Curing Light LED.D

• Wireless.
• The battery can be replaced.
• Three working modes: Full, Ramping, Pulse.
• Time setting: 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.
• A full charge can be used for over 400 times. (10s/time)
• Constant light intensity, the solidification effect is not affected by
• the consumption of remaining power.
• With wire or wireless. It can run directly on commercial power
• supply whilst the battery runs out.

Technical specifications

• Power supply:
• Rechargeable Lithium battery:

1. Battery voltage and capacity: 3.6V, 1400mAh 
2. Battery model: ICR18490
3. The battery includes over-voltage protection, over-current protection and short circuit protection.

• Adapter: 

1. Input: AC100V-240V 50Hz/60Hz
2. Output: DC5.0V/1A

• Applied part: Optical fiber
• Light source:
• 3W high power blue light LED
• Wave length: 385nm-515nm
• Light intensity: 1000mW/cm2~1700mW/cm2
• Work condition:

1. Environment temperature: +5°C~+40°C
2. Relative humidity: 30%~75% 
3. Atmosphere pressure: 70kPa to106kPa

• Size: 202mm×32mm×38mm
• Net weight: 143g
• Consume power: ≤8W
• Protection type against electrical shock: class II
• Protection degree against electrical shock: type B
• Protection against harmful ingress of water or particular matter: ordinary equipment (IPX0), not water protected.
• Safety in the presence of flammable anesthetic mixture with air-oxygen or nitrous oxide: not suitable under this condition.
• Equipment for operation in the room
• Non-continuously work instrument: after work 200 seconds, stop 60
• seconds, and then work 40 seconds, stop 60 seconds, work in the rule as above circularly.

Instructions Manual

• Instructions Manual