Fusion is a visible light cured, radiopaque highly filled fine composite restorative material for anterior and posterior restorations of all teeth.
Bisphenol A Glycidyl methacrylate, Bisphenol A diethoxy methacrylate, Urethane Dimethacrylate, Triethylene Glycol Dimethacrylate, Silanated Barium Glass Powder, Amorphous Fumed Silica
- Direct Restoration of all cavity classes in anterior and posterior teeth
- Preventive polymerization and repairs of composite ceramic veneers
- Correction of shade and shade for better aesthetics
- Core build-up & Composite inlays
- Excellent physical properties for long lasting restorations
- Lower polymerization shrinkage than conventional composites
- Higher filler contents
- Extremely high abrasion resistance
Instructions for use
Clean the tooth to be treated and adjacent teeth with a brush and prophy paste. Select the shade using VITA Shade Guide. Prepare the cavity using conservative cavity technique. No residual amalgam or other base material should be left in the cavity. Cover the area close to the pulp with hard setting√â‰ ¬´√å√é_CAL LC√â‰ ¬´√å√é_Light Cure Calcium Hydroxide paste. Apply√â‰ ¬´√å√é_Actino 37%√â‰ ¬´√å√é_Phosphoric Acid Etchant Gel for 15-20 sec. Remove Gel with vigorous water spray and rinse conditioned area for at least 10 sec. Blot dry conditioned area with a moist cotton pellet. Apply√â‰ ¬´√å√é_Fusion Bond 5√â‰ ¬´√å√é_dentine bonding agent with a disposable brush to the entire cavity. Ensure thorough wetting of the entire cavity. Allow 20 sec air drying and re apply another coat of dentine bonding agent. Remove excess solvent by gently drying with dry air for at least 5sec to ensure uniform glossy surface. Cure adhesive for 20-30 sec using standard curing light. Remove Fusion syringe cap and dispense material onto a mixing pad. Place the material into the cavity using a suitable placement instrument. After dispensing, screw plunger should be rotated anti clock wise by half to full turn to release residual pressure inside the syringe. Contour the material in the cavity. Light cure for 40 sec using standard curing light. When necessary build in increments of 2mm maximum using a layering technique. Shape and polish using standard technique and at last stage apply√â‰ ¬´√å√é_Nano Coat√â‰ ¬´√å√é_protective varnish.
Intro Kit 4 x 4g syringes Shades A1/A2/A3/A3.5 + 5ml Fusion Bond 5 + 2ml Etchant Gel + 10 x Applicator Tips + 10 Micro Brushes