Micron Luting (Radiopaque, Glass Ionomer Cement, Luting)

Save ₱50

₱1,350 ₱1,400


Micron Luting is the Ideal radiopaque, self curing translucent, particle glass-ionomer luting material with excellent tooth adhesion high fluoride release and flowability, It is useful for a wide range of clinical applications. Micron luting is available in a universal light yellow shade in Powder and Liquid Kits.


  • Cementation of inlays, onlays and crowns
  • Cementation of posts and screws
  • Attachment of metals orthodontics bands

Product Benefits

  • High fluoride release
  • Low solubility
  • Translucent shade
  • Very low film thickness


  • Powder: Fluoro Alumina Silicate Glass Powder
  • Liquid: Polyacrylic Acid Liquid (Thin Viscosity)

Instructions for Use

Powder/Liquid ratio (0.19/0.12), Mixing time (min. sec): 45-60 seconds, setting time (min. sec): 2min 30sec, (at 23̴å±1̴åÁC from start of mixing) Final finishing commencing time (after seating the restoration): 5 min.

  • Tooth Preparation:
    • Prepare tooth in usual manner. For pulp capping, use calcium hydroxide paste Calcigel.
    • Clean the prepared teeth with pumice and water.
    • Rinse thoroughly with water. Remove excess moisture by blotting with a cotton pellet or gently blowing with an oil free air.
    • DO NOT DESICCATE. Prepared surfaces should appear moist (glistering)
  • Restoration Preparation: Make sure that the restoration is pretreated and handled according to the manufacturer‚Ä∞€°√≥¬ªs instructions.
  • Powder and Liquid Dispensing:
    • The standard powder to liquid ratio is 0.19/0.12 (1level scoop of powder to 2 drops of liquid.)
    • For accurate dispensing of powder lightly tap the bottle against the hand. Do not shake or invert.
    • Hold the liquid bottle vertically and squeeze gently.
    • Close bottle immediately after use.
  • MIXING: Dispense Powder and Liquid into the pad. Using the plastic spatula add all the powder to the liquid. Mix rapidly for 45-60 seconds. NOTE: When mixing larger amounts, divide the powder into two equal parts. Mix the first portion with all of liquid for 15 seconds. Incorporate the remaining portion & mix the whole thoroughly for 45 seconds (Total 60 seconds).
  • APPLICATIONS: IMMEDIATELY apply (within 1 minute after dispensing) to the surfaces to be coated using a micro applicators, DO NOTAIR BLOW. NOTE: Should the coated surfaces be contaminated with water, blood or saliva, wash and dry the surface and repeat the coating procedure.
    • Coat the internal surface of the restoration with sufficient cement and seat immediately. The working time is 2 minutes from start of mixing at 23Ã¥√•¬±1Ã¥√•√ÅC (73.40Ã¥√•¬±1Ã¥√•√ÅF). Higher temperature shorten working time.
    • Maintain Moderate pressure.
    • Start removing excess cement when it feels rubbery.
    • Finishing can be started 4 minutes 30 seconds after seating the restoration.

Powder-15g, Liquid-10ml + 1xMixing Pad + 1x Plastic Spoon

You may also like

Recently viewed